Moire measurement of IC packages
Flip-chip components have been studied under thermal-cycles. An ultra sensitive displacement measuring technique Moire interferometry was used to investigate this phenomenon. The Moire interferometer was incorporated with a heating chamber whereby the real-time observation of the thermal-cycle proce...
محفوظ في:
المؤلف الرئيسي: | |
---|---|
مؤلفون آخرون: | |
التنسيق: | Theses and Dissertations |
منشور في: |
2008
|
الموضوعات: | |
الوصول للمادة أونلاين: | http://hdl.handle.net/10356/5804 |
الوسوم: |
إضافة وسم
لا توجد وسوم, كن أول من يضع وسما على هذه التسجيلة!
|
المؤسسة: | Nanyang Technological University |
الملخص: | Flip-chip components have been studied under thermal-cycles. An ultra sensitive displacement measuring technique Moire interferometry was used to investigate this phenomenon. The Moire interferometer was incorporated with a heating chamber whereby the real-time observation of the thermal-cycle process can be done. Flip-chip consists of three layers, the bottom layer is RF-4 substrate, middle and top layers being silicon and molding compound, respectively. Due to the difference in the coefficient of thermal expansion (CTE) of these three layers, the flip-chip will undergo warpage upon thermal cycling. In this experiment, the deformation was recorded using Moire system along the U, V and W fields respectively, and the thermo-mechanical behavior of flip-chip is characterized. The flip-chip structure has the thickness much smaller compared to the in-plane dimensions. This fact is used to build up a flip-chip warpage calculation model. This model assumes the out-of-plane deformation being smaller than the thickness of the flip-chip. It also assumes that the curvature is the same everywhere and the strains are axisymmetric. Out-of-plane deformation formula is derived and is calculated using an Excel spreadsheet. |
---|