Effect of vacuum cooling operation parameters on cooling time and weight loss of 'Red' holy basil

The effect of vacuum pressure reserving operation mode on cooling time, weight loss percentage and temperature variation of 'Red' holy basil were investigated. Vacuum cooling of holy basil packed in PVC film wrapped foam trays and holed plastic boxes using different vacuum pressure reservi...

وصف كامل

محفوظ في:
التفاصيل البيبلوغرافية
المؤلفون الرئيسيون: P. Boonprasom, D. Boonyakiat
التنسيق: Book Series
منشور في: 2018
الموضوعات:
الوصول للمادة أونلاين:https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=78650821187&origin=inward
http://cmuir.cmu.ac.th/jspui/handle/6653943832/50415
الوسوم: إضافة وسم
لا توجد وسوم, كن أول من يضع وسما على هذه التسجيلة!
المؤسسة: Chiang Mai University
الوصف
الملخص:The effect of vacuum pressure reserving operation mode on cooling time, weight loss percentage and temperature variation of 'Red' holy basil were investigated. Vacuum cooling of holy basil packed in PVC film wrapped foam trays and holed plastic boxes using different vacuum pressure reserving operation modes was investigated. Cooling holy basil packed in PVC film wrapped foam trays to 13±1°C consumed longer cooling times than holy basil packed in holed plastic boxes. The different operation conditions resulted in more effect on the cooling time of holy basil packed in holed plastic boxes than in PVC film wrapped foam trays. The lower final pressure caused higher weight loss. The optimum condition for the vacuum cooling process of 'Red' holy basil packed in PVC film wrapped foam trays with initial temperature of 21-24°C was at the final pressure of 12 mbar with pressure reserving of 3 minutes. For holy basil packed in a holed plastic box with an initial temperature of 21-24°C, the optimum condition was the final pressure at 12 mbar with pressure reserving of 1 minute. The cooling time of holy basil packed in PVC film wrapped foam and holed plastic boxes were 14 and 12 minutes and the weight losses percentage during the vacuum cooling process were 1.17 and 1.25, respectively.