Effect of added silicon carbide nanowires and carbon nanotubes on mechanical properties of 0-3 natural rubber composites

Effect of added silicon carbide nanowires and carbon nanotubes on mechanical properties of 0-3 natural rubber composites

© 2016 The Japan Society of Applied Physics. In this work, the mechanical properties of 0-3 nanocomposite materials containing silicon carbide nanowires (SiCNWs), carbon nanotubes (CNTs), and natural rubber were studied. The SiCNWs and CNTs were used as reinforcement fiber whereas natural rubber was...

Saved in:

書目詳細資料
Main Authors:	Khantichai Janyakunmongkol, Wim Nhuapeng, Wandee Thamjaree
格式:	雜誌
出版:	2018
主題:	Engineering Physics and Astronomy
在線閱讀:	https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84953306416&origin=inward http://cmuir.cmu.ac.th/jspui/handle/6653943832/55787
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Effect of added silicon carbide nanowires and carbon nanotubes on mechanical properties of 0-3 natural rubber composites
由: Janyakunmongkol K., et al.
出版: (2017)

Fabrication and mechanical properties of silicon carbide nanowires/epoxy resin composites
由: W. Nhuapeng, et al.
出版: (2018)

Optimization of diamond-like carbon thin film on copper substrate for carbon nanotubes synthesis by ACVD technique
由: Chotika Suttichart, et al.
出版: (2018)

Fabrication and mechanical properties of silicon carbide nanowires/epoxy resin composites
由: Nhuapeng W., et al.
出版: (2014)

Effect of plasma power on copper substrate used for synthesizing carbon nanotubes via Alcohol Catalytic Chemical Vapor Deposition (ACVD) technique
由: Sureewan Phunwaree, et al.
出版: (2018)

Effects of rare earth additive (Nd<inf>2</inf>O<inf>3</inf>) on microstructure and dielectric properties of lead zirconate titanate ceramics
由: Wandee Thamjaree, et al.
出版: (2018)

Improvement in the tensile strength of epoxy resin and hemp/epoxy resin composites using carbon nanotubes
由: Haruthai Longkullabutra, et al.
出版: (2018)

Optimization of diamond-like carbon thin film on copper substrate for carbon nanotubes synthesis by ACVD technique
由: Chotika Suttichart, et al.
出版: (2018)

Effect of wear tests on silicon carbide nanowires/aluminium metal powder composites
由: Thanut Jintakosol, et al.
出版: (2018)

Large-scale: Synthesis, microstructure, and FT-IR property of SiC nanowires
由: H. Longkullabutra, et al.
出版: (2018)

Effect of a low gas pressure plasma treatment on copper substrate used for carbon nanotubes synthesis
由: C. Suttichart, et al.
出版: (2018)

RBS and ERDA determinations of depth distributions of high-dose carbon ions implanted in silicon for silicon-carbide synthesis study
由: S. Intarasiri, et al.
出版: (2018)

Effect of Plasma Power on Copper Substrate Used for Synthesizing Carbon Nanotubes via Alcohol Catalytic Chemical Vapor Deposition (ACVD) Technique
由: Sureewan Phunwaree, et al.
出版: (2019)

Ion beam synthesis of silicon carbide
由: S. Intarasiri, et al.
出版: (2018)

Structural and physical properties of Nd-doped Pb(Zr<inf>0.52</inf>Ti<inf>0.48</inf>)O<inf>3</inf>ceramics
由: W. Thamjaree, et al.
出版: (2018)

Effect of coating time on LPP treated silk fabric coated with ZnO2 nanoparticles
由: Wattanaporn Intarasang, et al.
出版: (2018)

Stretchable and flexible high-strain sensors made using carbon nanotubes and graphite films on natural rubber
由: Sreenivasulu Tadakaluru, et al.
出版: (2018)

Nanocantilevers made of bent silicon carbide nanowire-in-silicon oxide nanocones
由: Lin, M., et al.
出版: (2014)

Effects of low-fluence swift iodine ion bombardment on the crystallization of ion-beam-synthesized silicon carbide
由: S. Intarasiri, et al.
出版: (2018)

Synthesis of silicon carbide nanowires doped with Al2O 3
由: Thanut Jintakosol, et al.
出版: (2018)

Enhanced thermal conductivity of epoxy composites filled with silicon carbide nanowires
由: Shen, D, et al.
出版: (2020)

Development and characterization of magnesium composites containing nano-sized silicon carbide and carbon nanotubes as hybrid reinforcements
由: Thakur, S.K., et al.
出版: (2014)

Electron linear accelerator system for natural rubber vulcanization
由: S. Rimjaem, et al.
出版: (2018)

Chlorination and characterization of natural rubber and its adhesion to nitrile rubber
由: Siriwat Radabutra, et al.
出版: (2018)

Epoxidation of vulcanized natural rubber for bonding to chloroprene rubber
由: Siriwat Radabutra, et al.
出版: (2018)

Fabrication and mechanical properties of the biocomposites between water hyacinth fiber and paper mulberry
由: Prapapan Khankham, et al.
出版: (2018)

Fabrication and mechanical properties of the biocomposites between water hyacinth fiber and paper mulberry
由: Prapapan Khankham, et al.
出版: (2018)

High-energy heavy ion beam annealing effect on ion beam synthesis of silicon carbide
由: J. Khamsuwan, et al.
出版: (2018)

Effect of wear tests on silicon carbide nanowires/aluminium metal powder composites
由: Jintakosol T., et al.
出版: (2014)

Mechanical properties of hemp fiber composites with carbon nanotubes reinforcement
由: Longkullabutra H., et al.
出版: (2014)

Mechanical properties of hemp fiber composites with carbon nanotubes reinforcement
由: H. Longkullabutra, et al.
出版: (2018)

Determination of chlorine content in chlorinated, vulcanized natural rubber by XANES
由: W. Klysubun, et al.
出版: (2018)

Crystallization of stretched network chains in cross-linked natural rubber
由: Masatoshi Tosaka, et al.
出版: (2018)

Theoretical study on hydrogen interaction with calcium decorated silicon carbide nanotube
由: Gueriba, Jessiel S.
出版: (2015)

Silicon carbide nanotubes as potential gas sensors for CO and HCN detection
由: Wu, R.Q., et al.
出版: (2014)

Spectroscopic investigation of polystyrene surface grafting on natural rubber
由: Supinya Prakanrat, et al.
出版: (2018)

Characterizations of carbon nanotubes grown on clay
由: S. Aodkeng, et al.
出版: (2020)

Molecular dynamics of natural rubber as revealed by dielectric spectroscopy: The role of natural cross-linking
由: Javier Carretero-González, et al.
出版: (2018)

Comparison of reinforcing efficiency of carbon black, conductive carbon black, and carbon nanotube in natural rubber
由: Pongdhorn Sae-Oui, et al.
出版: (2018)

Improvement in the tensile strength of epoxy resin and hemp/epoxy resin composites using carbon nanotubes
由: Longkullabutra H., et al.
出版: (2014)