A new approach to time-optimal path parameterization based on reachability analysis

بواسطة Pham, Hung, Pham, Quang-Cuong
منشور في 2019

Spattering in selective laser melting : a review of spatter formation, effects and countermeasures

بواسطة Ahmad Anwar, Pham, Quang-Cuong
منشور في 2018

Robotic manipulation of a rotating chain

بواسطة Pham, Hung, Pham, Quang-Cuong
منشور في 2019

Time-optimal parabolic interpolation with velocity, acceleration, and minimum-switch-time constraints

بواسطة Lertkultanon, Puttichai, Pham, Quang-Cuong
منشور في 2016

A Single-Query Manipulation Planner

بواسطة Lertkultanon, Puttichai, Pham, Quang-Cuong
منشور في 2017

A certified-complete bimanual manipulation planner

بواسطة Lertkultanon, Puttichai, Pham, Quang-Cuong
منشور في 2019

Planning coordinated motions for tethered planar mobile robots

بواسطة Zhang, Xu, Pham, Quang-Cuong
منشور في 2020

Effect Of Inert Gas Flow Velocity And Unidirectional Scanning On The Formation And Accumulation Of Spattered Powder During Selective Laser Melting

بواسطة Ahmad Bin Anwar, Pham, Quang-cuong
منشور في 2016

Selective laser melting of AlSi10Mg : effects of scan direction, part placement and inert gas flow velocity on tensile strength

بواسطة Ahmad Bin Anwar, Pham, Quang-Cuong
منشور في 2020

Study of the spatter distribution on the powder bed during selective laser melting

بواسطة Ahmad Bin Anwar, Pham, Quang-Cuong
منشور في 2019

Geometry-aware coverage path planning for depowdering on complex 3D surfaces

بواسطة Do, Van-Thach, Pham, Quang-Cuong
منشور في 2023

Completeness of randomized kinodynamic planners with state-based steering

بواسطة Caron, Stephane, Pham, Quang-Cuong, Nakamura, Yoshihiko
منشور في 2017

Automated post-processing of 3D-printed parts: artificial powdering for deep classification and localisation

بواسطة Lim, Joyce Xin-Yan, Pham, Quang-Cuong
منشور في 2023

The silhouette zoetrope : a new blend of motion, mirroring, depth, and size illusions

بواسطة Veras, Christine, Pham, Quang-Cuong, Maus, Gerrit W.
منشور في 2019

3D printing of curved concrete surfaces using Adaptable Membrane Formwork

بواسطة Lim, Jian Hui, Weng, Yiwei, Pham, Quang-Cuong
منشور في 2020

Improving flexural characteristics of 3D printed geopolymer composites with in-process steel cable reinforcement

بواسطة Lim, Jian Hui, Panda, Biranchi, Pham, Quang-Cuong
منشور في 2018

DFBVS: deep feature-based visual servo

بواسطة Adrian, Nicholas, Do, Van Thach, Pham, Quang-Cuong
منشور في 2023

Robotic 3D-Printing for Building and Construction

بواسطة Lim, Jian Hui, Pham, Quang-Cuong, Pham, Tien Hung
منشور في 2016

SCALAR - simultaneous calibration of 2D laser and robot's kinematic parameters using three planar constraints

بواسطة Lembono, Teguh Santoso, Suarez-Ruiz, Francisco, Pham, Quang-Cuong
منشور في 2020

Departure and conflict management in multi-robot path coordination

بواسطة Lertkultanon, Puttichai, Yang, Jingyi, Pham, Hung, Pham, Quang-Cuong
منشور في 2020