The Influence of Preheating on Laser Beam Melting

The Influence of Preheating on Laser Beam Melting

Laser Beam Melting (LBM) represents an additive process where metallic components are generated layer-wise. A laser beam operates as heat source melting metal powder. The temperature level in the heat affected zone is considered as a critical issue and can be influenced by many parameters, e.g. the...

Saved in:

書目詳細資料
Main Authors:	Berger, Uwe, Merkel, Markus, Liebisch, Andreas
其他作者:	Proceedings of the 2nd International Conference on Progress in Additive Manufacturing (Pro-AM 2016)
格式:	Conference or Workshop Item
語言:	English
出版:	2016
主題:	Heated building chamber Residual stresses
在線閱讀:	https://hdl.handle.net/10356/84417 http://hdl.handle.net/10220/41809
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!
機構:	Nanyang Technological University
語言:	English

相似書籍

Evaluation of Residual Stress in Selective Laser Melting of 316L Steel
由: Yadroitsava, Ina, et al.
出版: (2016)

Prediction of Residual Stresses during Stress-Relief Annealing on Martensitic Stainless Steel AISI 420
由: Laksamee Angkurarach, et al.
出版: (2020)

Novel method of residual stress reduction for AlSi10Mg manufactured using selective laser melting without compromise of mechanical strength
由: Lim, Chong Heng, et al.
出版: (2023)

Numerical and Experimental Study on the Residual Stresses in the Nitrided Steel
由: Song, X., et al.
出版: (2016)

The effect of scanning strategy on the thermal behavior and residual stress distribution of damping alloys during selective laser melting
由: Wu, Kaiwen
出版: (2024)

Laser peening of 420 martensitic stainless steel using ultrashort laser pulses
由: Maharjan, N., et al.
出版: (2021)

Charging of miniature flat heat pipes
由: Somasundaram, Sivanand, et al.
出版: (2019)

Laser cleaning of carbonaceous deposits on combustion engine components
由: Guan, Y., et al.
出版: (2014)

Convective heat transfer performance of airfoil heat sinks fabricated by selective laser melting
由: Ho, Jin Yao, et al.
出版: (2017)

Residual stress measurement in thin films using the semi-destructive ring-core drilling method using Focused Ion Beam
由: Song, X., et al.
出版: (2014)

Effect of residual stresses on the linear-elastic KI-T field for circumferential surface flaws in pipes
由: Qian, X., et al.
出版: (2014)

Post Weld Heat Treatment for High Strength Steel Welded Connections
由: Zhao, Ming Shan, et al.
出版: (2016)

Optimization of an amorphous silicon mask PECVD process for deep wet etching of Pyrex glass
由: Iliescu, C., et al.
出版: (2014)

Influences of scanning speed on selective laser melting : a computational study
由: Tang, Chao, et al.
出版: (2018)

A false transient model for the study of steady fluid motion and heat transfer in trapezoidal chambers with heated bases
由: Lee, T.S.
出版: (2014)

MECHANICAL PROPERTIES OF BALLIZED HOLES
由: OH JOO TIEN
出版: (2020)

Residual stress measurement in thin films at sub-micron scale using Focused Ion Beam milling and imaging
由: Song, X., et al.
出版: (2014)

Analysis of wettability effects on thermal performance of vapor chamber with a hybrid lattice Boltzmann method
由: Ji, Ruiyang, et al.
出版: (2024)

Transmitting antenna's reflected power and its influence on reverberation chamber calibration
由: Wei, X.C., et al.
出版: (2014)

Numerical modeling of residual stresses during vibratory peening of a 3-stage Blisk – a multi-scale discrete element and finite element approach
由: Alcaraz, Joselito Yam Tomacder, et al.
出版: (2022)

Experimental investigation and predictive models of membrane residual stresses in S690 high strength steel welded π-shaped and cruciform sections
由: Chen, Qianzhi, et al.
出版: (2024)

Strategies in deep wet etching of Pyrex glass
由: Iliescu, C., et al.
出版: (2014)

Residual stress in piezoelectric poly(vinylidene-fluoride-co- trifluoroethylene) thin films deposited on silicon substrates
由: Oh, S.R., et al.
出版: (2014)

STRESS ANALYSIS OF BALLISED HOLES
由: HE ZHIMIN
出版: (2020)

Exertional heat stroke: nutritional considerations.
由: Lee, Jason KW, et al.
出版: (2022)

Experimental study on radial suction flow and its effect in water vortex unit
由: Lyu, Xinrui, et al.
出版: (2024)

Investigations on the mechanical behavior of composite pipes considering process-induced residual stress
由: Yang, Xufeng, et al.
出版: (2023)

Nonlocal continuum crystal plasticity with internal residual stresses
由: Aghababaei, R., et al.
出版: (2014)

Evaluation of residual stress in flip chip using 3-D optical interferometry/FEM hybrid technique
由: Su, F., et al.
出版: (2014)

WASTE HEAT RECYCLING / MANAGEMENT IN BUILDINGS
由: CHAN KOK SHENG
出版: (2009)

Thermo-mechanical analyses for optimized path planning in laser aided additive manufacturing processes
由: Ren, K., et al.
出版: (2021)

Exploring gunshot residue detection in fingerprints by functionalized particle-coupled matrix-assisted laser desorption/ionization mass spectrometry
由: Adav, Sunil S., et al.
出版: (2024)

Characterization of heat transfer process in selective laser melting
由: Ong, Zong Wei.
出版: (2010)

Forced convection condensation in novel cross-section tubes fabricated by selective laser melting
由: Lee, Yi Wei
出版: (2020)

Convective drying with time-varying heat input: Simulation results
由: Islam, Md.R., et al.
出版: (2014)

Influence of nonuniform initial porosity distribution on adhesive failure in electronic packages
由: Chew, H.B., et al.
出版: (2014)

Selective Laser Melting Of Nickel Base Heat Resistance Alloy EP648
由: Nerush, S. V., et al.
出版: (2016)

Optimization of Deep Rolling Temperature for Fatigue Lifetime Enhancement of Martensitic Stainless Steel AISI 440C
由: Sai-yan Primee, et al.
出版: (2020)

QUANTIFYING WELDING RESIDUAL STRESSES AND THEIR EVOLUTIONS UNDER CYCLIC LOADING IN WELDED CONNECTIONS
由: WANG LE
出版: (2024)

Electronic speckle pattern interferometry of residual stress measurement using hole-indentation method
由: Sim, C.N., et al.
出版: (2014)