Morphology and kinetic study of the interfacial reaction between the Sn-3.5Ag solder and electroless Ni-P metallization

• Main Authors: Chen, Zhong, He, Min, Qi, Guojun
• 其他作者: School of Materials Science & Engineering
• 格式: Article
• 語言: English
• 出版: 2013
• 在線閱讀: https://hdl.handle.net/10356/97194; http://hdl.handle.net/10220/10439

This work summarizes the interfacial reaction between lead-free solder Sn-3.5Ag and electrolessly plated Ni-P metallization in terms of morphology and growth kinetics of the intermetallic compounds (IMC). Comparison with pure Ni metallization is made in order to clarify the role of P in the solder reaction. During reflow, the IMCs formed with the Ni-P under-bump metallization (UBM) exist in chunky crystal blocks and small crystal agglomerates, while the ones with the sputtered Ni UBM exhibit uniformly scallop grains with faceted surfaces. The IMC thickness increases with reflow time following approximately a t1/3 power law for both systems. The IMC growth rate is higher with the Ni-P UBM than the Ni UBM. The thickness of the Ni3Sn4 layer increases linearly with the square root of thermal aging time, indicating that the growth of the IMCs is a diffusion-controlled process. The activation energy for Ni3Sn4 growth in solid-state reaction is found to be 110 kJ/mol and 91 kJ/mol for the Ni-P and sputtered Ni UBMs, respectively. Kirkendall voids are detected inside the Ni3P layer in the Sn-3.5Ag/Ni-P system. No such voids are found in the Sn-3.5Ag/Ni system.