Fine pitch packaging study of CU or low-k devices
The main objective of this project is to improve and enhance the reliability performance of Cu / low-k flip chip ball grid array packages. This project is divided into three parts. The first part of the project involved developing an underfill selection methodology that enable researchers to screen...
Saved in:
Main Author: | |
---|---|
Other Authors: | |
Format: | Theses and Dissertations |
Language: | English |
Published: |
2009
|
Subjects: | |
Online Access: | http://hdl.handle.net/10356/14975 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Institution: | Nanyang Technological University |
Language: | English |
Summary: | The main objective of this project is to improve and enhance the reliability performance of Cu / low-k flip chip ball grid array packages. This project is divided into three parts. The first part of the project involved developing an underfill selection methodology that enable researchers to screen away unfavourable candidates and chose the best underfills for their package through a series of reliability testing. The underfill selection methodology adopted in this project took into consideration of the overall underfill’s material properties, such as the fracture toughness, delamination performance, coefficient of moisture expansion, flowability and filler settlement. The driving stress or strain for failure at low-k layers and at solder bump corners were also included as one of the factor with the help of FEA modeling. Using this underfill selection methodology, we have managed to revise the underfill’s thermal properties range suitable for 15 x 15 mm2 flip chip packages, which will assist researchers in having a wider option in underfill selection for future FCBGA package. The second part of the project studied two types of interconnection schemes (i.e. 97.5Sn2.5Ag solder bumps and copper pillar interconnection). The reliability performance between these two interconnection scheme was compared using FEA modeling and through a series of reliability tests. EDX analysis was also conducted to examine the intermetallic compounds formed after reflow and after 1000 cycles of thermal cycling test. This work has enabled us to select more reliable interconnection scheme for future flip chip packages whereby the use of Pb in eutectic solder bumps is forbidden. In this section, we have demonstrated that copper pillar interconnection has better thermal mechanical performance than lead-free solder bumps, which can be considered as an option in replacing eutectic solder. The final part of the project focused on improving the package reliability performance by optimising certain package design parameters (i.e. dicing methods, die thickness and location of die pad). A set of parametric study have been carried out to evaluate the reliability performance between various parameters. By understanding the impact of these design parameters on package reliability has enabled us to further improve on flip chip package reliability. |
---|