Rotary ultrasonic-assisted abrasive flow finishing and its fundamental performance in Al6061 machining

Rotary ultrasonic-assisted abrasive flow finishing and its fundamental performance in Al6061 machining

The geometric complexity of 3D-printed parts increases the difficulty of surface finishing with the conventional grinding technique. In this study, a rotary ultrasonic-assisted abrasive flow finishing (RUA-AFF) method is proposed towards improving the performance of the AFF process by providing rota...

Saved in:

書目詳細資料
Main Authors:	Wang, Qiuyan, Vohra, Moiz Sabbir, Bai, Shuowei, Yeo, Swee Hock
其他作者:	School of Mechanical and Aerospace Engineering
格式:	Article
語言:	English
出版:	2022
主題:	Engineering::Mechanical engineering Abrasive Flow Finishing Viscoelastic Abrasive Medium
在線閱讀:	https://hdl.handle.net/10356/160123
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Surface modification of additive manufactured components by ultrasonic cavitation abrasive finishing
由: Tan, Kai Liang, et al.
出版: (2017)

Surface finishing on IN625 additively manufactured surfaces by combined ultrasonic cavitation and abrasion
由: Tan, Kheng Leong, et al.
出版: (2021)

Experimental investigation on magnetic abrasive finishing for internal surfaces of waveguides produced by selective laser melting
由: Wang, Liaoyuan, et al.
出版: (2024)

A study of the production of silicon carbide abrasives from coke oven gas
由: Bautista, Carlos Chito S.
出版: (1972)

A study to improve abrasion resistance of natural rubber
由: Chaiyaporn Pomchaitawat
出版: (2023)

Experimental investigation into nano-finishing of β-TNTZ alloy using magnetorheological fluid magnetic abrasive finishing process for orthopedic applications
由: Prakash, Chander, et al.
出版: (2022)

Impact-abrasion behavior of low alloy white cast irons
由: Ma, Q., et al.
出版: (2014)

The manufacture of silicon carbide abrasive
由: Escobar, Arturo
出版: (1961)

3D Scanning Technique for Abrasion of Shoe Sole
由: Ong, Jaka
出版: (2017)

Modelling and monitoring of abrasive finishing processes using artificial intelligence techniques : a review
由: Pandiyan, Vigneashwara, et al.
出版: (2020)

Scratching of polymers-Modeling abrasive wear
由: Sinha, S.K., et al.
出版: (2014)

Magneto-rheological fluid assisted abrasive nanofinishing of ?-phase ti-nb-ta-zr alloy: Parametric appraisal and corrosion analysis
由: Singh, S., et al.
出版: (2021)

The manufacture of silicon carbide in its crude and finished forms
由: Diaz, Anastacio P., et al.
出版: (1979)

An analytical investigation of pad wear caused by the conditioner in fixed abrasive chemical–mechanical polishing
由: Nguyen, N. Y., et al.
出版: (2016)

Development of fixed abrasive chemical mechanical polishing process for glass disk substrates
由: Tian, Ye Bing, et al.
出版: (2016)

Effects of chemical slurries on fixed abrasive chemical-mechanical polishing of optical silicon substrates
由: Tian, Yebing, et al.
出版: (2016)

Abrasivity measurement of brittle rock after thermal treatment
由: Wang, Lu, et al.
出版: (2023)

Surface quality and material removal in magnetic abrasive finishing of selective laser melted 316L stainless steel
由: Zhang, J., et al.
出版: (2020)

The Effect of Coconut Fiber as Concrete Reinforcement on Abrasion Resistance and Water Permeability
由: Aquino, Karl Andre F., et al.
出版: (2021)

In-process tool condition monitoring in compliant abrasive belt grinding process using support vector machine and genetic algorithm
由: Pandiyan, Vigneashwara, et al.
出版: (2019)

Modelling of material removal in abrasive belt grinding process : a regression approach
由: Pandiyan, Vigneashwara, et al.
出版: (2021)

In-process endpoint detection of weld seam removal in robotic abrasive belt grinding process
由: Pandiyan, Vigneashwara, et al.
出版: (2019)

A study on ultrasonic vibration cutting of low alloy steel
由: Nath, C., et al.
出版: (2014)

Temperature-dependent abrasivity of Bukit Timah granite and implications for drill bit wear in thermo-mechanical drilling
由: Ji, Yinlin, et al.
出版: (2022)

A study of abrasive jet micro-grooving of quartz crystals
由: Moridi, A., et al.
出版: (2014)

In-process virtual verification of weld seam removal in robotic abrasive belt grinding process using deep learning
由: Pandiyan, Vigneashwara, et al.
出版: (2021)

Three-dimensional topography modelling of regular prismatic grain coated abrasive discs
由: Arunachalam, Adhithya Plato Sidharth, et al.
出版: (2020)

Use of Acoustic Emissions to detect change in contact mechanisms caused by tool wear in abrasive belt grinding process
由: Pandiyan, Vigneashwara, et al.
出版: (2019)

Recent developments and applications of chemical mechanical polishing
由: Zhong, Zhao Wei
出版: (2022)

Synergistic effects in hydrodynamic cavitation abrasive finishing for internal surface-finish enhancement of additive-manufactured components
由: Nagalingam, Arun Prasanth, et al.
出版: (2020)

Modeling and analysis of the material removal profile for free abrasive polishing with sub-aperture pad
由: Fan, C., et al.
出版: (2014)

Influence of water exposure on three-body wear of composite restoratives
由: Yap, A.U.J., et al.
出版: (2014)

Microabrasive-assisted exfoliation of graphene from graphite
由: Velasquez, Joan Candice P., et al.
出版: (2012)

Chapter 6 Scratching of polymers: Deformation mapping and wear modeling
由: Sinha, S.K.
出版: (2014)

Robotics and Computer-Integrated Manufacturing
由: Pandiyan, Vigneashwara, et al.
出版: (2019)

Investigation of compliant fixed abrasive machining of internal surfaces using flexible tool
由: Vohra Moiz Sabbir
出版: (2017)

Influence of third particle on the tribological behaviors of diamond-like carbon films
由: Bai, Lichun, et al.
出版: (2018)

Scanning electron microscope characterization of abrasion in human teeth.
由: Ratthapong Worawongvasu, et al.
出版: (2015)

Modeling and characterization of abrasive-free copper chemical mechanical planarization process
由: TABASSUMUL HAQUE
出版: (2010)

On surface enhancement using viscoelastic abrasive laden media in rotary ultrasonic finishing process
由: Mun, Wai Hoong
出版: (2019)