Design of human-like hand-arm for human-assisted manipulation

• المؤلف الرئيسي: Wang, Lei
• مؤلفون آخرون: Xie Ming
• التنسيق: Theses and Dissertations
• اللغة: English
• منشور في: 2010
• الموضوعات: DRNTU::Engineering::Mechanical engineering::Mechatronics; DRNTU::Engineering::Mechanical engineering::Robots
• الوصول للمادة أونلاين: https://hdl.handle.net/10356/20862

A hand-arm system is an important module on a humanoid robot. It enables a humanoid robot to perform grasping and manipulation for many applications such as providing helps to elderly people. However, owing to limited space and weight, most humanoid robots are equipped with simple hand-arm systems, in which the hands have much lesser degrees of freedom than a human being’s hands. Therefore, it is a challenge to design and implement a robotic hand-arm system which is similar to that of a human being. In this project, a human-like hand-arm system is designed and implemented. The hand has 6 independent and 4 coupled degrees of freedom (DOFs) for its five fingers and the arm has 6 DOFs. In the design of human-like hand, each finger is assigned 2 DOFs. In this way, a hand will have 10 DOFs. However, in order to achieve the requirement of compact size, only six DOFs are actuated, and the other four DOFs will be coupled to the actuated DOFs. To realize such joint couplings, four bar linkage and rack-pinion structure are adopted.