Critical temperatures in thermocompression gold stud bonding
A study on temperature dependence in gold-gold (Au–Au) thermocompression bonding was performed. Gold studs were bonded to two kinds of surfaces—cofired gold on alumina and electroless nickel covered with immersion Au on silicon. A critical bonding temperature was...
Saved in:
| Main Authors: | , , , , |
|---|---|
| 其他作者: | |
| 格式: | Article |
| 語言: | English |
| 出版: |
2012
|
| 主題: | |
| 在線閱讀: | https://hdl.handle.net/10356/90506 http://hdl.handle.net/10220/7735 |
| 標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
| 機構: | Nanyang Technological University |
| 語言: | English |
| id |
sg-ntu-dr.10356-90506 |
|---|---|
| record_format |
dspace |
| spelling |
sg-ntu-dr.10356-905062023-07-14T15:51:43Z Critical temperatures in thermocompression gold stud bonding Zhang, G. G. Ang, X. F. Chen, Z. Wong, Chee C. Wei, J. School of Materials Science & Engineering DRNTU::Engineering::Materials A study on temperature dependence in gold-gold (Au–Au) thermocompression bonding was performed. Gold studs were bonded to two kinds of surfaces—cofired gold on alumina and electroless nickel covered with immersion Au on silicon. A critical bonding temperature was observed for both substrates. No bonding occurs when the temperature is below this threshold value, whereas bond strength increases with bonding temperature beyond the threshold. This critical temperature can be related to the activation of organic films on the bonding surfaces. Under similar bonding conditions, the critical temperature is lower for a harder substrate than for a softer substrate, primarily because of larger interfacial shear stresses. This is supported by the observation on the interfacial shear stress distribution at the bonding interface based on finite element simulation models of substrates with different hardness. Published version 2012-04-12T01:31:20Z 2019-12-06T17:48:54Z 2012-04-12T01:31:20Z 2019-12-06T17:48:54Z 2007 2007 Journal Article Zhang, G. G., Ang, X. F., Chen, Z., & Wong, C. C. & Wei, J. (2007). Critical temperatures in thermocompression gold stud bonding. Journal of Applied Physics, 102 (6). https://hdl.handle.net/10356/90506 http://hdl.handle.net/10220/7735 10.1063/1.2783974 en Journal of applied physics © 2007 American Institute of Physics. This paper was published in Journal of Applied Physics and is made available as an electronic reprint (preprint) with permission of American Institute of Physics. The paper can be found at the following DOI: http://dx.doi.org/10.1063/1.2783974. One print or electronic copy may be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via electronic or other means, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper is prohibited and is subject to penalties under law. 7 p. application/pdf |
| institution |
Nanyang Technological University |
| building |
NTU Library |
| continent |
Asia |
| country |
Singapore Singapore |
| content_provider |
NTU Library |
| collection |
DR-NTU |
| language |
English |
| topic |
DRNTU::Engineering::Materials |
| spellingShingle |
DRNTU::Engineering::Materials Zhang, G. G. Ang, X. F. Chen, Z. Wong, Chee C. Wei, J. Critical temperatures in thermocompression gold stud bonding |
| description |
A study on temperature dependence in gold-gold (Au–Au) thermocompression bonding was
performed. Gold studs were bonded to two kinds of surfaces—cofired gold on alumina and
electroless nickel covered with immersion Au on silicon. A critical bonding temperature was
observed for both substrates. No bonding occurs when the temperature is below this threshold value,
whereas bond strength increases with bonding temperature beyond the threshold. This critical
temperature can be related to the activation of organic films on the bonding surfaces. Under similar
bonding conditions, the critical temperature is lower for a harder substrate than for a softer substrate,
primarily because of larger interfacial shear stresses. This is supported by the observation on the
interfacial shear stress distribution at the bonding interface based on finite element simulation
models of substrates with different hardness. |
| author2 |
School of Materials Science & Engineering |
| author_facet |
School of Materials Science & Engineering Zhang, G. G. Ang, X. F. Chen, Z. Wong, Chee C. Wei, J. |
| format |
Article |
| author |
Zhang, G. G. Ang, X. F. Chen, Z. Wong, Chee C. Wei, J. |
| author_sort |
Zhang, G. G. |
| title |
Critical temperatures in thermocompression gold stud bonding |
| title_short |
Critical temperatures in thermocompression gold stud bonding |
| title_full |
Critical temperatures in thermocompression gold stud bonding |
| title_fullStr |
Critical temperatures in thermocompression gold stud bonding |
| title_full_unstemmed |
Critical temperatures in thermocompression gold stud bonding |
| title_sort |
critical temperatures in thermocompression gold stud bonding |
| publishDate |
2012 |
| url |
https://hdl.handle.net/10356/90506 http://hdl.handle.net/10220/7735 |
| _version_ |
1772828642471051264 |