Growth and fabrication of carbon-based three-dimensional heterostructure in through-silicon vias (TSVs) for 3D interconnects

• Main Authors: Zhu, Ye, Tan, Chong Wei, Chua, Shen Lin, Lim, Yu Dian, Tay, Beng Kang, Tan, Chuan Seng
• Other Authors: School of Electrical and Electronic Engineering
• Format: Conference or Workshop Item
• Language: English
• Published: 2021
• Subjects: Engineering::Electrical and electronic engineering; Carbon Nanomaterials; Through-Silicon Vias
• Online Access: https://hdl.handle.net/10356/151178
• Institution: Nanyang Technological University

Carbon nanomaterials such as graphene and carbon nanotubes (CNTs) have recently received much attention as potential materials proposed for integration in the future semiconductor technologies because of the advantageous properties particularly in thermal and electrical conductivities. Among them, three-dimensional (3D) pillared CNT-graphene nanostructures are especially attractive due to the desirable out-of-plane and in-plane properties. In this work, a growth and fabrication process flow of CNT-graphene heterostructure as filler of TSV for 3D interconnects was designed and explored. First, experiments for the fabrication of top wafer with unfilled TSV of various diameters (5-50μm) and bottom wafer with patterned graphene electrodes and catalyst deposition were completed successfully. Next, top TSV wafer and bottom graphene wafer were bonded and manually ground followed by wet and dry etching to completely remove the handling wafer and buried oxide, exposing the underlying TSV. CNT growth was conducted for both within TSV and free standing on the graphene. Compared to the free-standing growth with sufficient length (~334μm) and high density (~10 11 cm -2 estimated), few via holes have CNTs grown and none was completely filled by CNTs. The inhibited growth of CNTs within unfilled TSV can possibly be attributed to several process-engineering steps involved in wafer-bonding, grinding and wet/dry etching. Further modification and optimization of the process steps need to be done in order to attain higher CNT fillings within the unfilled TSV.