Geometry of contact during tooling tasks via dynamic estimation

Geometry of contact during tooling tasks via dynamic estimation

Contact area and contact forces between tool and workpiece are important variables for the estimation of the material removal rate during mechanical polishing, carried out during either manual or robotic operations. With a view to estimate the contact conditions during tool-workpiece interaction, a...

Saved in:

書目詳細資料
Main Authors:	Phan, Gia-Hoang, Tommasino, Paolo, Hussain, Asif, Hansen, Clint, Castagne, Sylvie, Campolo, Domenico
其他作者:	School of Mechanical and Aerospace Engineering
格式:	Article
語言:	English
出版:	2020
主題:	Engineering::Mechanical engineering Polishing Instrumented tool
在線閱讀:	https://hdl.handle.net/10356/142493
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!
機構:	Nanyang Technological University
語言:	English

相似書籍

Estimating human wrist stiffness during a tooling task
由: Phan, Gia-Hoang, et al.
出版: (2021)

Design and characterization of an instrumented hand-held power tool to capture dynamic interaction with the workpiece during manual operations
由: Phan, Gia-Hoang, et al.
出版: (2022)

Material removal analysis for compliant polishing tool using adaptive meshing technique and Archard wear model
由: Arunachalam, Adhithya Plato Sidharth, et al.
出版: (2020)

A complementary filter design on SE(3) to identify micro-motions during 3D motion tracking
由: Phan, Gia-Hoang, et al.
出版: (2021)

Impedance controlled human–robot collaborative tooling for edge chamfering and polishing applications
由: Kana, Sreekanth, et al.
出版: (2022)

DEVELOPMENT OF MORPHABLE POLISHING TOOLS AND PROCESSES
由: NIE QIANQIAN
出版: (2023)

An experimental study into the effect of micro-textures on the performance of cutting tool
由: Durairaj, Shanmugasundaram, et al.
出版: (2020)

Synergistic integrated design of an electrochemical mechanical polishing end-effector for robotic polishing applications
由: Abd El Khalick Mohammad, et al.
出版: (2020)

Development of fixed abrasive chemical mechanical polishing process for glass disk substrates
由: Tian, Ye Bing, et al.
出版: (2016)

The manufacture of shoe polish
由: Echevarria, Jorge, et al.
出版: (1976)

The manufacture of shoe polish
由: Echevarria, Jorge, et al.
出版: (1976)

Advanced polishing, grinding and finishing processes for various manufacturing applications: a review
由: Zhong, Zhao Wei
出版: (2022)

Instrumented tools and algorithms for estimation of human joint mechanical impedance during tooling tasks
由: Phan, GIa Hoang
出版: (2017)

Polishing of tungsten carbide by combination of anodizing and silica slurry polishing
由: Deng, Hui, et al.
出版: (2019)

Surface texturing of fan-blade body by random-orbital polishing with in-line aqueous mist
由: Danaraj, Edgar Jeevan, et al.
出版: (2022)

Stainless steel rod polishing and buffing machine
由: Cuaresma, Michael John, et al.
出版: (2009)

Laser polishing of additive manufactured Ti alloys
由: Ma, C. P., et al.
出版: (2018)

A study of the polishing process of a turbine blade for automation
由: MARLON M MUSNGI
出版: (2010)

A planning framework for robotic insertion tasks via hydroelastic contact model
由: Yang, Lin, et al.
出版: (2023)

A feasibility study on the local manufacture of hand tools
由: Narciso, Rogelio S.
出版: (1967)

The effect of tool edge radius on the contact phenomenon of tool-based micromachining
由: Woon, K.S., et al.
出版: (2014)

A STUDY ON THE DEVELOPMENT OF MAGNETICALLY DRIVEN INTERNAL FINISHING TECHNIQUE
由: ZHANG JIONG
出版: (2021)

Fabrication of different geometry cutting tools and their effect on the vertical micro-grinding of BK7 glass
由: Perveen, A., et al.
出版: (2014)

Material characterization, thermal analysis, and mechanical performance of a laser-polished Ti alloy prepared by selective laser melting
由: Li, Yu-Hang, et al.
出版: (2019)

A high-bandwidth end-effector with active force control for robotic polishing
由: Li, Jian, et al.
出版: (2021)

An extended passive motion paradigm for human-like posture and movement planning in redundant manipulators
由: Tommasino, Paolo, et al.
出版: (2018)

An analytical investigation of pad wear caused by the conditioner in fixed abrasive chemical–mechanical polishing
由: Nguyen, N. Y., et al.
出版: (2016)

The manufacture of silicon carbide in its crude and finished forms
由: Diaz, Anastacio P., et al.
出版: (1979)

Designing Performance Tasks in Mathematics Using Technological Tools
由: De Las Peñas, Ma. Louise Antonette N, et al.
出版: (2021)

Human–robot co-manipulation during surface tooling: a general framework based on impedance control, haptic rendering and discrete geometry
由: Kana, Sreekanth, et al.
出版: (2022)

An efficient cutter contact curve tool path regeneration algorithm for sculptured surface machining
由: Zhang, L.P., et al.
出版: (2014)

Task-space separation principle : from human postural synergies to bio-inspired motion planning for redundant manipulators
由: Tommasino, Paolo
出版: (2017)

Machine tools for high performance machining
出版: (2017)

Improvement of the pad wear shape in fixed abrasive chemical-mechanical polishing for manufacturing optical components
由: Nguyen, N. Y., et al.
出版: (2018)

Feasibility study of the hand tool factory
由: Jose, Eduardo, Jr.
出版: (1971)

Effects of chemical slurries on fixed abrasive chemical-mechanical polishing of optical silicon substrates
由: Tian, Yebing, et al.
出版: (2016)

Modeling and simulation for the distribution of slurry particles in chemical mechanical polishing
由: Nguyen, N. Y., et al.
出版: (2016)

A feasibility study on the local manufacture of hand tools
由: Pasicolan, Rogelio B.
出版: (1970)

Tool condition monitoring using laser scatter pattern
由: Wong, Y.S., et al.
出版: (2014)

Optimized tool path generation for fast tool servo diamond turning of micro-structured surfaces
由: Yu, D.P., et al.
出版: (2014)