Process and reliability studies of solder bumping using eutectic sn/pb solder
This project studies the differences in solder bumping using different bumping technologies. The two technologies of interest are printing technology and plating technology for solder deposition process. It was found that printing technology required two mask sets as compared to 1 mask for plati...
Saved in:
Main Author: | Lo, Marvin Chen Yang. |
---|---|
Other Authors: | Zhong, Zhaowei |
Format: | Theses and Dissertations |
Published: |
2008
|
Subjects: | |
Online Access: | http://hdl.handle.net/10356/6083 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Institution: | Nanyang Technological University |
Similar Items
-
Reliability analysis of surface mount solder joints
by: Yeo, Chee Keng.
Published: (2009) -
Lead-free PCB assembly and effect of solder joint profile on the reliability of PCB assembly
by: Periannan Arulvanan.
Published: (2008) -
Solid state interfacial reaction of Sn–37Pb and Sn–3.5Ag solders with Ni–P under bump metallization
by: He, Min, et al.
Published: (2012) -
Manufacture of cored solder wire and soldering ribbons
by: Ampil, Eduardo G.
Published: (1960) -
Barrier properties of thin Au/Ni–P under bump metallization for Sn–3.5Ag solder
by: Kumar, Aditya, et al.
Published: (2013)